=== Diskcopy === Version. -------- This is the documentation for FreeDOS diskcopy beta 0.6. This version is a candidate for a stable version and contains all the planned features for diskcopy. These include: - disk copies for any disk using FAT12 with a disk size which is a multiple of 16Kb for example 160 Kb, 180 Kb, 320 Kb, 360 Kb, 720 Kb, 1.44 Mb and 2.88Mb disks. - use of XMS, EMS, swap files and main memory for disk copies. - full verification of read and writes - image file support (full as well as small image files). - mouse button support. - rawrite compatibility. - disk error recovery mode. - ini file support for easier configuration. - ini cache file support for fastest configuration file reads. - fast diskcopy (only copy sectors that are realy filled). - multi language support. - long file name support. - optional update of serial number. - diskcopy can be compiled using only freely available software. - runs under DOS-C in DOSEMU New in this version. -------------------- a) multi language support. b) small image files. c) fast diskcopy. d) multi language support. e) before using a swap file, diskcopy now looks wether the whole disk can be fitted in main memory. f) real verification of reads and writes. g) long file name support. h) disk serial number adjustment (calculation not DOS compatible yet). i) further optimizations on the .ini parser. j) lots of other bug fixes. k) the program has been tested to run under DOS-C in DOSEMU 1.0.2 (the out of the box installation). This means it runs under FreeDOS. Be carefull however DOS-C is known to trash partition info when running in a non-protected environment. Authors. -------- Mathew Stanford (original version). Imre Leber (imre.leber@worldonline.be). License. -------- Diskcopy is distributed under the terms of the GNU General Public License (see COPYING for details). The XMS and EMS public domain routines by Cliff Rhodes have been translated to nasm by Imre Leber and the assembly versions have been put under the GNU General Public License by Imre Leber. The file drvtypes.asm is a nasm translation of a pascal source file. Since this file has been given to me by Ralph Quint this file remains under the public domain. The two libraries used are cats and io95. Cats is written by Jim Hall (jhall@freedos.org) and io95 is written by Steffen Kaiser (Steffen.Kaiser@fh-rhein-seig.de). Both libraries are released under the GNU LGPL. The original version of free diskcopy has been written by Matthew Stanford, who personally asked me to work on it further. Purpose. -------- Diskcopy is a free implementation of the dos utility with the same name. It currently supports disk copies for almost any diskette type including 160 Kb, 180 Kb, 320 Kb, 360 Kb, 720 Kb, 1.2 MB, 1.44 MB and 2.88 MB disks, using XMS, EMS, buffers or swap file. On top of that diskcopy supports the use of image files. Syntax and usage. ----------------- The syntax for diskcopy is as follows: Diskcopy [/a][/v][/m][/i][/o][/1][/x][/d][/r][/f][/?] The parameters are to be interpreted as: source: drive or image file to copy from. destination: drive or image file to copy to. /a : give an audible warning for user action. This option gives a beep each time user action is required. /v : verify reads and writes. With this option enabled reads and writes are verified. Notice that using this option takes twice as long as without it. The DOS verify flag is not influenced by this option. /m : only use memory for disk copy. With this option only memory is used for the diskcopy, meaning either XMS, EMS or buffers. /i : show memory usage (informative). Tells you which kind of memory is used. /o : overwrite destination, if it already exists (in case of an image file). When you want to make an image file of a floppy disk and a file with that name already exists the program refuses to overwrite the file. With this option you can change this behaviour and force an overwrite of existing files. /x : always automatically exit. This switch makes sure the program always exit. You will most likely notice this at the end of the program. If you use this switch the program will no longer ask you wether you want another copy of the disk or wether you want another copy of the disk. /d : assume disk already in drive. This switch is used to speed up disk copying. The program will not ask you to insert the source or destination diskette if possible. /r : go into error recovery mode. Sometimes part of a disk is unreadable, but everything else is still valid. In those cases you might want to copy the disk to a new disk, while recovering as much data as possible. Using this switch you can force diskcopy to scan more effectively for media errors on the disk and recover more of the disk than is possible without the switch. This option is not available, if you compile diskcopy to always be in error recovery mode (see also further). /f : perform fast diskcopy (only copy filled sectors). using this option only the sectors which are filled are copied resulting in a much faster way of making a disk copy. Notice however that the copy of the target disk in this case is not exactly the same as that of the original. All files on the disk will however be identical to those on the original disk. This option is also used to make small image files. These image files will then contain only the information of sectors which contain data. If you write the image file back to a disk the disk will not be identical to the first disk, but all files will be the same. /t : don't ask target disk if copying image file to same disk. When copying an image file to the same disk as the one that is being copied, the program normally asks to insert a new disk. When using this option the image file is directly written directly to the disk without asking for an other disk. /1 : this option doesn't do anything but has been included for MS-DOS compatibility. /? : displays the help screen. The character for the options (the '/') actually depends on the DOS switch character. If you have changed it to an other character than '/', you can use that character instead (but this is not required). Because there is now support for a configuration file, options set in the configuration file can be cleared by using a minus sign (-) after the option. compile time options. --------------------- There are two compile time options that can be chosen to select different ways in which diskcopy works. The options can be set in the makefile for the source by changing the comments of the following four lines: #hlpoptions = hlpoptions = -DDEF_HELP recoptions = #recoptions = -DALL_RECOVERY_MODE These two lines contain defines that can be turned on or off, the meaning is as follows: hlpotions = [-DDEF_HELP] This define changes the behaviour of diskcopy when there are no parameters. The default is to show the help on the screen. By changing the define you can get the more MS-DOS like message Invalid drive specification or non removable media. which was used in earlier versions of diskcopy. recoptions = [-DALL_RECOVERY_MODE] This define changes the way recovery mode is selected. Normally recovery mode is only selected when the user uses the /r switch. When using this define diskcopy is always in recovery mode and the /r switch is no longer valid and results in a warning. Image files. ------------ Image files are files that contain the contents of a floppy disk in raw format. These files can contain all the data of the disk or only the information needed to rebuild the files of the original disk. The main advatage of image files is that one can save the contents of a floppy on a different medium, like a CD-ROM or a hard disk and recreate the disk only when you need it. Image files allso make it possible to distribute image files through the internet. To make an image file the following command can be used: diskcopy a: example.img To rewrite the contents to a different floppy disk you can do the following: diskcopy example.img a: For reasons of closure it is allso possible to copy image files with diskcopy, as follows: diskcopy example1.img example2.img but this is (almost) the same as copy example1.img example2.img. As said there are two kinds of image files. The first kind being a full representation of the disk. This kind is the default and is generated when: - the .ini file doesn't contain the option "SPEED = FULL", or - the /f option is not used and/or the /f- option is used The second kind only copies the relevant parts of the disk resulting in a potentially much smaller image file. This image file is generated when: - the .ini file contains the option "SPEED = FULL", or - the option /f is used and/or the /f- option is not used. Examples: Generate a full image file: No option "SPEED = FULL" in ini file: diskcopy a: example1.img Making sure that a full image file is generated: diskcopy a: example1.img /f- Generate a small image file: Option "SPEED = FULL" used in ini file: diskcopy a: example1.img Making sure that a small image file is generated: diskcopy a: example1.img /f The /f option (or the SPEED= option in the .ini file) makes no difference when copying the image file back to a disk. Diskcopy can find out by itself what kind of image file is used. When writing an image file to the same disk as the one which is copied, it is assumed that a small image file needed to be created. This is because a long image file would have never fitted on the disk. Also writing an image file to the same disk is done in two parts. First everything is written into memory. Then the user is asked to insert a second disk. Then the data is written to the newly inserted disk. If you want to copy a file to the same disk as where the copy came from, use: - the /t switch: don't ask target disk if copying to same disk; or - set ASKTDISK to NO in the .ini file Rawrite compatibility. ---------------------- The image files supported by diskcopy are now also compatible with rawrite image files (commonly used with linux distributions and the FreeDOS distribution). Diskcopy can thus be used to create the images for use with rawrite. There is only one thing to notice here. Because diskcopy uses DOS to find out the disk sizes for the diskettes it can only work with FAT. Reading from non DOS disks is impossible. On the other hand writing to a disk formatted to use FAT is possible no matter what the image file itself contains. If there is an other file system on the diskette format a: /q can be use before writing an image file to the diskette. Windows compatibility. ---------------------- Because diskcopy only uses DOS to copy disks it can be used to write in a DOS box under windows without having to lock the drives first. Any boot sector will be written correctly so that the disk will be bootable. Diskcopy fully supports long file names. To support long file names a driver does however need to be loaded. For FreeDOS LFNDOS and DOSLFN are available. Under windows NT you can use NTLFN. See http://www.cybertrails.com/~fys/longfile.htm for more information concerning these drivers and where to get them. Under windows 95 or 98 the driver is included directly in the operating system and no special driver is needed. Diskcopy.ini file. ------------------ In order to facilitate using diskcopy you can optionally create a diskcopy.ini file to store the options you use often. The structure of a diskcopy.ini is pretty standard: There are three headers for the selection of options: [- OPTION -] and [- MEMORY-] and [- GENERATE -] which form blocks containing option statements. (The "-" in "[-" and "-]" is optional) Option statements are of the form: LVALUE = RVALUE where the "=" and the RVALUE are optional (if the RVALUE is not entered nothing happens). The option statements that can be used in a [- OPTION -] block are: audible = YES audible = NO turns the audible warning before user action on or off. verify = YES verify = NO turns verification on or off. askdisk = YES askdisk = NO determines wether a disk is asked to be inserted. asktdisk = YES asktdisk = NO When copying an image file to the same disk as the one that is being copied, the program normally asks to insert a new disk. When setting this option to NO the image file is directly written directly to the disk without asking for an other disk. informative = YES informative = NO determines wether the memory type is shown. overwrite = ALWAYS overwrite = NEVER determines wether to overwrite the destination, if the destination is an image file. autoexit = YES autoexit = NO determines wether the program should automatically exit. mode = RECOVERY mode = NORMAL determines wether the program should allways be in recovery mode or not. The option statements that can be used in a [- MEMORY -] block are: XMS = YES XMS = NO determines wether XMS memory can be used. EMS = YES EMS = NO determines wether EMS memory can be used. DISK = YES DISK = NO determines wether a swap file can be used. SPEED = FULL SPEED = FAST perform fast disk copy or generate small image files if "SPEED = FAST" is used SERIALNUMBER = LEAVE SERIALNUMBER = UPDATE when setting this option to LEAVE the serial number is not updated. when setting it to UPDATE the serial number is updated. The option statement that can be used in a [- GENERATE -] block is: USEDATFILE = YES USEDATFILE = NO determines wether a compiled ini file should be generated (see further). The diskcopy.ini file is looked up in the following places and in the following order: 1) the environment variable "dkcpini" can point to a directory where the diskcopy.ini file is located. If no diskcopy.ini file is found or the directory does not exist the search is continued. 2) the executable's directory. 3) the current directory. Notes: 1) DOS shoudn't be case sensitive so diskcopy isn't either. 2) command line options overwrite the options in the diskcopy.ini file. Compiled ini file. ------------------ In a previous version of diskcopy the .ini file had to be interpreted each time the program is used. An .ini file is by definition a file that is written once for many uses. Therefore the speed of reading an .ini file can be increased by generating a seperate file containing that contains only the essential information contained in an .ini file and using that file as long as the .ini file has not changed. By using a simple entry in the .ini file such a file is generated with the name diskcopy.dat. The entry is: USEDATFILE = YES USEDATFILE = NO When the option is set to YES a diskcopy.dat file is generated whenever the .ini file is changed. That the .ini file is newer is checked using the normal way by looking at the file time. (This is thus the same method used by the make utility). A few checks are build in to ensure that any file with the name diskcopy.dat is realy a diskcopy generated file. If the file is not valid it will not be used. The file, however, can be overwritten when generating a new diskcopy.dat file. Multi language support ---------------------- FreeDOS diskcopy has multi language support. To change to an other language then the default language (english) you should use two enviroment variables: nlspath = This environment variable should point to the directory where your multi language files are located. lang = This environment variable defines the code for the language you want to use. These two variables point to a file called: \diskcopy. For example: c:\freedos\nls\diskcopy.en If you installed the FreeDOS distribution you should already have files in this directory. An other method exist of using nlspath and lang to point to directories like: \\diskcopy For example: c:\freedos\nls\en\diskcopy Notice that this file does not have an extension. The currently supported languages are dutch and english. If you want support for an other language you should translate the strings in the diskcopy.en file. You can do this without changing the sources. If you do translate the language file. Please send them to me (imre.leber@worldonline.be). Jim Hall will probably also accept these files you can reach him at jhall@freedos.org. The current maintainer for the FreeDOS internalization project is Aitor Santamaria Merino (Aitor.sm@terra.es). Volume serial number. --------------------- The program now also updates the volume serial number. The calculation of this number is not same as that used in DOS 4. For this reason the sources can be compiled not to include the update. This will change as soon as i figure out how the serial number is computed in DOS 4. If anybody knows how to compute the serial number please contact me (imre.leber@worldonline.be). Examples. --------- Diskcopy a: a: /a /i Copy a floppy disk from a: to a:, give a beep before user action and show memory usage. Diskcopy a: example.img Copy the contents of the floppy disk in drive a: to the image file example.img. Diskcopy example.img a: Copy the contents of the file example.img to the floppy disk in drive a: Diskcopy example1.img example2.img Copy the file example1.img to the file example2.img. Diskcopy a: a: /a- Copy the contents of the disk in drive a: to another disk in drive a:, making sure there is no beep for user action. Diskcopy a: a:a /f Create a small image file of drive a: on drive a: Notice that in this case: - The program can give an out of memory error if the entire contents can not be copied in one time. - The resulting file "a" is not included in the image file. Diskcopy a:a a:, or identically: diskcopy a:a a: /f Copy the image file "a" on drive a: to drive a: Notice that in this case: - The contents of drive a: is overwritten. So the image file is gone too! * * * The following example shows the defaults for a diskcopy.ini file (using these values is the same as not using a diskcopy.ini file at all). [- MEMORY -] DISK = YES # SWAP file allowed XMS = YES # XMS allowed EMS = YES # EMS allowed [- OPTIONS -] AUDIBLE = NO # don't use a beep before asking for input VERIFY = NO # don't verify read and writes INFORMATIVE = NO # don't show memory usage OVERWRITE = NEVER # never overwrite an existing file AUTOEXIT = NO # don't automatically exit MODE = NORMAL # not in recovery mode ASKDISK = YES # ask for a disk before copying SPEED = FULL # copy all sectors ASKTDISK = YES # ask for a disk when creating an image file # on the same disk [- GENERATION -] USEDATFILE = NO # Use the DAT file Another example illustrating the more liberal syntaxis is: [- MEMORY ] EMS = YES [ OPTIONS -] AUDIBLE NO VeRiFy = NO INFORMATIVE OVERWRITE = NeVeR AUTOEXIT #= NO MODE =# NORMAL #ASKDISK = YES [ MEMORY ] DISK = YES XMS = YES Planned improvements. --------------------- Make diskcopy compile with pacific C. Improve calculation of the volume serial number.