# /etc/printcap
#
# Please don't edit this file directly unless you know what you are doing!
# Be warned that the control-panel printtool requires a very strict format!
# Look at the printcap(5) man page for more info.
#
# This file can be edited with the printtool in the control-panel.

##PRINTTOOL3## REMOTE 
wh3e_hp5si_single|wh3e_hp5si_s|wh3e_hp5si:\
	:sd=/var/spool/lpd/wh3e_hp5si_single:\
	:mx#0:\
	:sh:\
	:rm=fnprt:\
	:rp=wh3e_hp5si:
##PRINTTOOL3## REMOTE 
wh3e_hp5si_double|wh3e_hp5si_d:\
	:sd=/var/spool/lpd/wh3e_hp5si_double:\
	:mx#0:\
	:sh:\
	:rm=fnprt:\
	:rp=wh3e_hp5si_d:
##PRINTTOOL3## REMOTE 
wh3w_hp5si_single|wh3w_hp5si_s|wh3w_hp5si:\
	:sd=/var/spool/lpd/wh3w_hp5si_single:\
	:mx#0:\
	:sh:\
	:rm=fnprt:\
	:rp=wh3w_hp5si:
##PRINTTOOL3## REMOTE 
wh3w_hp5si_double|wh3w_hp5si_d:\
	:sd=/var/spool/lpd/wh3w_hp5si_double:\
	:mx#0:\
	:sh:\
	:rm=fnprt:\
	:rp=wh3w_hp5si_d:
##PRINTTOOL3## REMOTE 
wh3e_tekclr|wh3e_tekcolor:\
	:sd=/var/spool/lpd/wh3e_tekclr:\
	:mx#0:\
	:sh:\
	:rm=fnprt:\
	:rp=wh3e_tekclr:
##PRINTTOOL3## REMOTE 
wh3e_tekclr_trans|wh3e_tekcolor_trans:\
	:sd=/var/spool/lpd/wh3e_tekclr_trans:\
	:mx#0:\
	:sh:\
	:rm=fnprt:\
	:rp=wh3e_tekclr_trans:
##PRINTTOOL3## REMOTE 
wh3w_colorps:\
	:sd=/var/spool/lpd/wh3w_colorps:\
	:mx#0:\
	:sh:\
	:rm=fnprt:\
	:rp=wh3w_colorps:
##PRINTTOOL3## REMOTE 
wh3w_colorps_trans|wh3w_colorps_trans:\
	:sd=/var/spool/lpd/wh3w_colorps_trans:\
	:mx#0:\
	:sh:\
	:rm=fnprt:\
	:rp=wh3w_colorps_trans: